High-density tungsten alloy is an alloy with tungsten as the matrix (tungsten content is 85%~99%) and a small amount of Ni, Fe, Co, Cu, Mo, Cr, Mn and other elements added. Its density is as high as 16.5~19.0 g/cm3. It has a series of excellent properties such as high density, high strength, good toughness, good machining performance, good electrical and thermal conductivity, small thermal expan

  Niobium is the lightest refractory metal (density of 8.57 g/cm3), niobium and niobium alloys have high melting point, high high high temperature strength and specific strength, good room temperature machinability, weldability and corrosion resistance, and non-radioactive, which are preferred thermal protection materials and structural materials for aviation and space engines [1-3]. The traditional

  Basic Properties of TantalumTantalum metal is silvery white with a density of 16.654 g/cm3. Its high density is related to relative atomic mass, atomic radius and atomic volume. The relative atomic mass of tantalum atom is about 180.95, the atomic volume is 10.9 cm³/mol, and the atomic radius is 0.146 nm. The relative atomic mass per unit atomic volume is large, so its density is high. Tantal

  The term “additive manufacturing” references technologies that grow three-dimensional objects one superfine layer at a time. Each successive layer bonds to the preceding layer of melted or partially melted material. Objects are digitally defined by computer-aided-design (CAD) software that is used to create .stl files that essentially "slice" the object into ultra-thin layers. This inf

  Our plasma spheroidization system range enables both the development and industrial production of highly spherical metallic or ceramic powders, without introducing any impurities. Starting with precursors feedstocks such as crushed, atomized and sponged powders, with sizes ranging from between 5 and 500 μm, we produce perfectly spherical powder particles. In order to meet the specific needs of

  Hot isostatic pressing (HIP) is a manufacturing process, used to reduce the porosity of metals and increase the density of many ceramic materials. This improves the material's mechanical properties and workability. The process can be used to produce waste form classes. Calcined radioactive waste (waste with additives) is packed into a thin walled metal canister. The adsorbed gases are removed with

  Powder metallurgy (PM) is a term covering a wide range of ways in which materials or components are made from metal powders. PM processes can reduce or eliminate the need for subtractive processes in manufacturing, lowering material losses and reducing the cost of the final product. Powder metallurgy is also used to make unique materials impossible to get from melting or forming in other ways. A v